To submit a request for demos, select the checkboxes for the required demos, complete the form, then click "submit" at the bottom of the page.
Important!Please provide at least 24 hrs notice when requesting demos

Mechanics
Linear Momentum and Collisions - demos for chap 9, Serway

OLD UT: 10.3A Unequal Mass Elastic Balls
PIRA: 1N30.20 Collision Balls

OLD UT: 10.3B Newton's Collision Pendulum
PIRA: 1N30.10 Collision Balls

OLD UT: 10.4B Ballistics Pendulum
PIRA: 1M40.40 Ballistics Pendulum

OLD UT: 10.4A5 Super Ball
PIRA: 1R40.30 Dead and Live Balls

OLD UT: 10.4A7 Dead Balls
PIRA: 1R40.30 Dead and Live Balls

OLD UT: 9.1A Center of Mass Board w/ UV Light
PIRA: 1D40.10 Throw Objects

Rotation of a Rigid Body About a Fixed Axis - demos for chap 10, Serway

OLD UT: 12.2B Newton-Meter Demonstration
PIRA: 1J40.10 Grip Bar

OLD UT: 12.2A Torque Wrench Breaking Bolt
PIRA: 1J40.15 Torque Wrench

OLD UT: 12.5C Ring and Disk on Inclined Plane
PIRA: 1Q10.30 Ring, Disc, and Sphere

OLD UT: 12.7B Giant Yo-Yo
PIRA: 1K10.30 Walking the Spool

Electromagnetism
Faraday's Law - demos for chap 31, Serway

OLD UT: 35.1A Magnetic Field Demonstrator with Iron Filings
PIRA: 5K10.24 Number of Turns and Induced EMF

OLD UT: 35.3B Solenoid with Magnet and Galvanometer (part of Faraday cart)
PIRA: 5K10.20 Induction Coil w/ Magnet, Galvanometer

OLD UT: 35.3D Lenz's Law Tube
PIRA: 5K20.25 Magnets in Eddy Tubes

OLD UT: 35.3A1 Jumping Ring
PIRA: 5K20.30 Jumping Ring

OLD UT: 36.2B Inductance Device w/ Primary and Secondary Coils
PIRA: 5K10.40 Iron Core in Mutual Inductance

Inductance - demos for chap 32, Serway

OLD UT: 36.4A Magnetic Choke with Light Bulb (resonance in an LRC circuit)
PIRA: 5L10.10 Inductive Choke

OLD UT: 38.1B LRC Circuit on Scope (Ringing)
PIRA: 5J30.10 RLC Circuit

Demo Ordering Instructions:

1) Requested demonstrations have an x clicked into the appropriate box.

2) Go down to the form and fill in all appropriate information.
Proof read for the correct date, time and room number.

3 ) Click on the 'Submit This Demo Request' button.
This will process your request.
4) A screen will appear showing the request that was sent to us. Please verify this.
If there is an error message, don't panic. Your data is stored in your PC.
Click on your browser's back button and make sure all infromation was filled in.
If, all the form fields are correctly filled in and you still get an error message,
contact Dr. Trappe at trappe@physics.utexas.edu, or or call the demo office.

5) It is recommended that you click on the word, "verify", on the confirmation screen.
Pay attention to the scheduled date, time and room number of the request.

Important!Please provide at least 8 working hrs notice.

Working hours are Monday thru Friday, 7:30 AM - 4:30 PM.

Instructions on Ordering Demonstrations

**Last name** (all lowercase!), or **guest**
**Password**, or **guest**
Time & Room	Day of demos

If you selected an unlisted time and room, enter the desired time and room in the box below.

Notes, Comments, or Instructions
Unlisted Demos (one per line, no punctuation)

Please provide at least 8 working hrs notice. Back to Lecturedemo Home Page